Please use this identifier to cite or link to this item: http://localhost:8080/xmlui/handle/123456789/7768
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAli, Ashraf Abdulrazzaq-
dc.contributor.authorSafi, Ihab Nabeel-
dc.date.accessioned2024-11-11T04:40:50Z-
dc.date.available2024-11-11T04:40:50Z-
dc.date.issued2023-
dc.identifier.issn1658-3612-
dc.identifier.urihttp://localhost:8080/xmlui/handle/123456789/7768-
dc.description.abstractObjectives: Maxillofacial silicone is used to restore abnormalities due to congenital or acquired causes. However, the quality of silicone is far from ideal. This study was aimed at assessing the influence of the addition of cellulose nanofibers (CNFs; several nanometers in diameter and 2e5 mm long) on the physical and mechanical characteristics of maxillofacial silicone elastomers. Methods: Two CNF weight percentages (0.5% and 1%) were tested, and 180 specimens were divided into one control and two experimental groups. Each group was subdivided into six subgroups. In each subgroup, ten specimens subjected to each of the following tests: tearing strength, Shore-A hardness, tensile strength, elongation percentage, surface roughness, and color stability. The samples were additionally analyzed with Fourier transform infrared spectroscopy (FTIR) and field emission scanning electronic microscopy (FESEM). Results: The 0.5% CNF group, compared with the control group, exhibited highly significantly greater tearing strength, elongation percentage, hardness Shore-A, and surface roughness, and substantially greater tensile strength. However, color stability did not significantly differ between groups. The 1% CNF group showed significantly greater Shore-A hardness, tear strength, color stability, and surface roughness, and insignificantly lower tensile strength and percentage elongating values, than the control group. FESEM imaging revealed good CNF dispersion. The FTIR spectra indicated that CNFs interacted with silicone through surface functional hydroxyl groups. Conclusion: Addition of 0.5 wt. % CNF to silicone elastomers increased the material’s mechanical tensile strength, tear strength, elongation percentage, and hardness as long as it stayed within the acceptable range for clinical use. Surface roughness increased in direct proportion to the amount of nanofibers added. Moreover, addition of 0.5 wt. % CNF to silicone polymers had insignificant effects on color stability.en_US
dc.language.isoen_USen_US
dc.publisherJournal of Taibah University Medical Sciencesen_US
dc.relation.ispartofseriesOriginal Article;1616-1626-
dc.subjectElongationen_US
dc.subjectNanofiberen_US
dc.subjectHardnessen_US
dc.subjectRoughnessen_US
dc.subjectTearen_US
dc.subjectTensileen_US
dc.titleImpact of nano-cellulose fiber addition on physico-mechanical properties of room temperature vulcanized maxillofacial silicone materialen_US
dc.typeArticleen_US
Appears in Collections:Vol 18 No 6 (2023)

Files in This Item:
File Description SizeFormat 
1616-1626.pdf2.56 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.