DSpace Collection:http://localhost:8080/xmlui/handle/123456789/120752026-04-09T07:29:56Z2026-04-09T07:29:56ZPengaruh Jenis Kain terhadap Hasil Jadi Rok LingkarAmilia, WidyaPrasetyaningtyas, Wulansarihttp://localhost:8080/xmlui/handle/123456789/121022025-07-17T07:34:51Z2024-01-01T00:00:00ZTitle: Pengaruh Jenis Kain terhadap Hasil Jadi Rok Lingkar
Authors: Amilia, Widya; Prasetyaningtyas, Wulansari
Abstract: Abstract. Circle skirt is a skirt that has a flare or development at the bottom of the skirt with a pattern of 1/6 minus 1 from the
waist circumference. The making of circle skirts depends on the use of the materials used, therefore the selection of textile
materials in making circle skirts has an effect on in terms of the type of material and design used in each clothing model. This
study aims to determine the results of circle skirts and the effect of the type of material on the results of the best circle skirts
based on the criteria. This type of research is a quantitative study, by comparing two kinds of fabrics on circle tocks using satin
and taffeta materials made with S size and L size pattern constructions. The data collection method used was observation with
an instrument in the form of a check list, with 30 observations. Data analysis techniques using simple linear regression the
results of the analysis show that the use of circle skirts in the S size and L size models is viewed from the aspect, the accuracy
of the waist, the location of the waves, balance and the results of the hem under the skirt. There is an effect of the use of
materials on the resulting skirt circumference at the waist, the fall of the wave, the balance of the lower skirt circumference,
and the hem of the bottom of the skirt has a significant difference, with the highest average value in the use of bridal satin
fabric2024-01-01T00:00:00ZQuality Of Tie Dye Using Papaya Leaves Extract (Carica papaya L.)Nahdiyah, AyuKusumastuti, Adhihttp://localhost:8080/xmlui/handle/123456789/121012025-07-17T07:33:30Z2024-01-01T00:00:00ZTitle: Quality Of Tie Dye Using Papaya Leaves Extract (Carica papaya L.)
Authors: Nahdiyah, Ayu; Kusumastuti, Adhi
Abstract: Abstract. Papaya plant is one type of plant that is widely cultivated in Indonesia. Papaya leaves contain chlorophyll,
tannins, flavonoids, alkaloids, steroids, saponins and triterpenoids which can be used as basic ingredients for the
manufacture of natural dyes for textiles. Utilization of papaya leaves as natural dyes can reduce the impact of environmental
damage caused by synthetic dyes. This study aims to determine the quality of color strength, color fastness to detergent
washing and motive sharpness on primissima mori fabric using tie dyeing technique with variations in the pH of papaya
leaf extract and the mordant used is mordant alum, quicklime, and tunjung. This research is a type of experimental research.
The data collection technique used was a laboratory test. The data analysis technique used is descriptive analysis. The
results of the descriptive analysis showed that the darkest color strength test results were produced by mordant tunjung pH
6 with a reflectance value of 3.51% and a transmittance value of 96.49% including very dark criteria. The best test values
for color fastness to detergent washing were alum mordant at pH 2 and pH 12 and quicklime mordant pH 2 with an average
gray scale value of 4-5 in the good category. The test value for the sharpest tie dye motive is the mordant tunjung pH 6 with
a reflectance value of 3.51% and a transmittance value of 103% including very sharp criteria. The conclusion from several
test results shows that the use of different pH variations and types of mordant can affect the results of the quality of dyeing
on fabrics.2024-01-01T00:00:00ZPerbedaan Hasil jadi Shibori dengan Pewarna Dispersi pada Kain Satin Velvet dan Satin MaxmaraRisqi Vauziah, PutriMusdalifah, Musdalifahhttp://localhost:8080/xmlui/handle/123456789/121002025-07-17T07:32:02Z2024-01-01T00:00:00ZTitle: Perbedaan Hasil jadi Shibori dengan Pewarna Dispersi pada Kain Satin Velvet dan Satin Maxmara
Authors: Risqi Vauziah, Putri; Musdalifah, Musdalifah
Abstract: Abstract. Shibori is a fabric dyeing technique that includes stitching, twisting, tying, pinning, and wrapping. Although all
materials can be made of shibori, the shibori dyeing process is adapted to the material used, for example, cellulose fibers
such as cotton, linen, and rayon use reactive dyes, and protein fibers such as silk and wool are acid-dyed. Meanwhile,
synthetic fibers such as polyester are colored with dispersed dyes. The purpose of this study was to determine the differences
in the results of shibori with dispersion dyes on satin velvet and satin maxmara in terms of the clarity of the motifs and the
sharpness of the colors. This type of research is experimental research. Independent variable: satin velvet and satin
maxmara. Dependent variable: the clarity of the shibori motif and the sharpness of the color. Control variables: The color
of the dispersion agent is red, the kumo shibori technique, the thread spacing is the same, the number of brushes is three
times, the fabric size is 115cm x 115cm, and the processing time is the same. The data collection method is the observation
method with 25 respondents. The data analysis technique is descriptive analysis and data analysis uses the t-test with the
SPSS 25 program with α > 0.05. Based on The t-test, showed that there was no difference in the results of shibori with
dispersion dyes on satin velvet and satin maxmara in terms of two aspects, namely the clarity of the motifs and the sharpness
of the colors. The descriptive results show that satin velvet has a higher mean than satin maxmara.2024-01-01T00:00:00ZKualitas Hasil Ecoprint Motif Daun Jenitri dengan ZWA Daun Ketapang menggunakan Mordan Tawas, Tunjung dan Kapur TohorPrawati Maratu Sholikhah, AnggunWidowati, Widowatihttp://localhost:8080/xmlui/handle/123456789/120992025-07-17T07:30:40Z2024-01-01T00:00:00ZTitle: Kualitas Hasil Ecoprint Motif Daun Jenitri dengan ZWA Daun Ketapang menggunakan Mordan Tawas, Tunjung dan Kapur Tohor
Authors: Prawati Maratu Sholikhah, Anggun; Widowati, Widowati
Abstract: Abstract. The problem of textile waste encourages industry players to implement eco-fashion, steps to support eco-fashion
by implementing ecoprint. Ecoprint is a technique of transferring colors and leaf motifs onto the surface of the fabric. This
research uses the ecoprint steam medium print technique with alum, tunjung and quicklime mordant. The aim of this
research is to determine the effect of using mordant on the quality of ecoprints in the color and motif aspects. Analysis of
the fastness results in the gray scale and staining scale tests was best obtained by ecoprint using quicklime mordant with
an average result of 4 (Good) in the gray scale test and an average of 4.55 (Good) in the staining scale test. Testing color
aging (R%) the highest value for ecoprint mordant Tunjung with an average of 3,795. Analysis of the results on motif
aesthetics, the best results were Tunjung ecoprint mordant with an average of 3.4 (Quite Good). The color direction results
showed that Alum mordant produced Oyster-Wood color, Tunjung mordant produced Smoke-Shadow color, and Tohor
lime mordant produced Hazel Wood-Carob. Based on the research results, it can be concluded that mordant has an
influence on fastness, color aging and motif aesthetics. The suggestion from this research is to increase the soaking time
for natural dyes, especially alum mordant. The choice of leaves, either as a motif or as a natural dye, greatly influences
the quality of the ecoprint2024-01-01T00:00:00Z